The PulseTech SP-24-6 24-Volt Solar Pulse Charge Monitor System is designed to supply pulsed current to maintain 24-Volt lead-acid batteries on generators or vehicles left in long-term outdoor storage to allow them to restart when you're ready to go again. The heavy duty 6.3-Watt solar panel comes with battery clamps. This 24-volt Solar Battery Charger Maintainer features colored LEDs indicate when the battery is being pulsed, charged and when there is insufficient solar output to operate.

24V Battery Solar Charger Maintainer 6.3-Watt

SKU: SP-24-6
    • Works on all kinds of 24-Volt lead acid batteries and 24-Volt battery systems
    • Perfect solution for charging and maintaining vehicles in long-term storage outdoor storage
    • Has smaller size solar panel with higher efficiency, longer life crystalline silicon cells
    • Patented Pulse Technology extends battery life up to 5 times    
    • Maintains batteries indefinitely without danger of overcharging or overheating
    • Reverse polarity protected
    • One-Year Limited Warranty

    Charge, maintain and desulfate any vehicle or equipment with a 24-Volt lead-acid battery or 24-Volt battery system (VRLA, AGM or flooded) left in long-term outside storage or used infrequently. You don’t need AC power when you harness the sun's energy to prevent the normal loss of battery power on stored vehicles no matter how long they sit unused. Even when connected for months at a time there is no danger of the battery overheating or overcharging. In fact, the longer the SP-24-6 is attached to the battery the better! 

    All of PulseTech's solar panels have higher efficiency, higher quality crystalline silicon cells that pack more power per square inch and have a longer life than standard amorphous ''thin film'' solar cells. That means you can get the power you need in a sturdier, smaller-sized solar panel with more installation options. Instead of a breakable glass coating, the SP-24-6's solar panel is protected with a clear polyurethane plastic coating that makes it virtually indestructible, impervious to weather aging and damage from bumps and knocks.The SP-24-6 mounts at an angle above the circuit box allowing for better solar absorption. This solar panel can either be temporarily placed on the vehicle allowing panel rotation for optimum efficiency or can be mounted permanently. 

    You can tell if the system is working by a quick glance at the LED indicators. When the green LED is flashing, the battery is being charged and when the green LED is steadily on the battery is fully charged.  During and after the charge cycle, the solar panel also supplies energy to the optimized pulse technology circuit to reverse the buildup of energy robbing sulfate deposits on the battery plates - the main cause of battery failure.  The flashing red LED indicates that the battery is being pulsed. If no batteries are connected, the battery connection is faulty, or the battery or battery system is measuring less than 22-volts, the red monitor LED will remain steadily on telling you to check the battery connection.